background image

38

ENGLISH

1.0 Relationship with the 
authorities

Jøtul FS 

166

 – I 

570

 is a freestanding product with Jøtul I 

570

 as 

the burn chamber, which can be positioned against inflammable 
walls at the distances described in 

Fig. 1.

Installation of the fireplace must be according to local codes and 
regulations in each country. All local regulations, including those 
that refer to national and European standards, shall be complied 
with when installing the product.

Installation instructions for the surround are included.
Installation and user instructions for the insert are enclosed 
with the product.
For day-to-day use, maintenance, servicing, etc., please see this 
document. The installation may only be used once it has been 
inspected and a certificate of completion has been issued. 

Prior to using the product the installation must be approved by 
a qualified person. 

The classification label for the free-standing products is enclosed 
with the surround’s installation instructions and is to be placed 
on the backside of upper back plate 

(Fig. 2 - position 15)

.

This contains information about identification and documentation 
for the product. 

2.0 Technical data

Weight, surround:  

Approx. 440 kg

Weight, burn chamber:  

220 kg

Height: 1835 

mm

Width: 1025 

mm

Depth: 536 

mm

Height, centre smoke outlet: 

1587 mm

(Technical data for burn chamber - see installation manual for 
Jøtul I 

570

)

Optional equipment

• 

Ash 

solution 

  cat.no. 

50012921

Table of contents

1.0    Relationship with the authorities .............38

2.0   Technical data .............................................38

3.0    Parts of the surround ................................ 40

4.0   Prior to installation .................................... 41

5.0   Mounting ....................................................42

6.0   Installation completed .............................. 46

6.0   Maintenance ............................................. 46

7.0   Optional equipment ................................. 46

 

On all our products there is a label 
indicating the serial number and 
year. Write this number in the 
place indicated in the installation 
instructions. 

Always quote this serial number 
when contacting your retailer or 
Jøtul.

les combustibles recommandés.

Respectez les consignes d'utilisation. Utilisez uniquement

Verwenden Sie nur empfohlenen Brennstoffen.

Montage- und Bedienungsanleitung beachten. 

Follow user`s instructions. Use only recommended fuels.

standard

Certificate/

The appliance can be used in a shared flue.

Minimum distance to adjacent combustible materials:

Emission of CO in combustion products

Serial no: Y-xxxx, Year: 200x

Manufacturer:

N-1602 Fredrikstad
Norway

Jøtul AS
POB 1441

Sweden

EUR

Intermittent

Nominal heat output      

Norway

Country

Operational type

Fuel type

Operation range

Efficiency

Klasse II

Classification

Standard

Flue gas temperature             

Room heater fired by solid fuel

Product:

Jøtul

SP Sveriges Provnings- och

221546

Forskningsinstitut AB
SP Swedish National 
Testing and Research
Institute

:

Approved by

:

:

:
:

:
:

:

Minimum distance to adjacent combustible materials:

OGC 

SP 

EN 

Serial no.

Summary of Contents for FS 166 -I 570













Reviews: