jotron.com
Page 19 of 52
is important that they are not misshaped by the tightening of the screws. If
they are misshaped, the dampers will not work as designed.
4.5
Mounting the EPIRB in the bracket
4.5.1
Tron 40AIS
1
2
3
1.
Make sure the bracket is not damaged.
2.
Grab the EPIRB and match the bottom of the battery housing
correct on the bracket base and gently press the EPIRB
into the stability clip.
3.
Place the cover by fitting it from the bottom first. Mount the
locking pin to securely hold the cover in place. See chapter 4.6 for
details.
If the bracket is mounted correctly, on a flat surface, the EPIRB shall fit in
the bracket without any gap in the stability clip.