jotron 103660, Operator And Installation Manual

Page: 6 / 104

Doc. No.: 103839 Rev. A
jotron.com
Page 6 of 104
3 Introduction
This manual describes the operation of the TR-8000 MkII and the belonging devices.
3.1 Safety Instructions
This equipment should be installed according to the instructions found in the installation part of this
manual.
The equipment should not be mounted in a way that exposes it for excessive heat from the sun or
other sources.
The equipment should not be mounted in a flammable environment.
The equipment should not be mounted in a way that exposes it to direct rain or water.
This equipment contains CMOS integrated circuits. Observe handling
precautions to avoid static discharges which may damage these devices.
Do not open equipment. Only qualified personell should service the equipment.
3.2 Compass Safe Distance
Transponder unit:
Standard compass: 95cm
Steering compass: 65cm
Display unit:
Standard compass: 30cm
Steering compass : 14cm
3.3 Copyright Notice
This manual, as well as the software described in it, is furnished under license and may be used or copied only in
accordance with the terms of such license. The content of this manual is furnished for informational use only, is
subject to change without notice, and should not be constructed as a commitment by Jotron AS. Except as
permitted by such license, no part of this publication may be reproduced, stored in a retrieval system, or
transmitted, in any form or by any means, electronic, mechanical, recording, or otherwise, without the prior
written permission by Jotron AS.
Please remember that existing artwork or images that you want to include in your project may be protected under
copyright law. The unauthorized incorporation of such material into your new work could be a violation of the
rights of the copyright owner. Please be sure to obtain any permission required from the copyright owner.
3.4 Disclaimer Notice
The information in this book has been carefully checked and is believed to be accurate.
However, no responsibility is assumed for inaccuracies.