Joranalogue ENHANCE 2 Quick Start Manual Download Page 1

 

ENHANCE 2 

STEREOPHONIC ENHANCER 

 

 

 

INTRODUCTION 

Moving from mono to stereo sound: a logical 
progression for any synthesist looking to expand 
their sonic palette. Making use of two audio 
channels, rather than just one, quite literally adds 
another dimension to the capabilities of a 
synthesiser. 

Unfortunately, controlling stereo signals can be a 
challenge within a modular system.  This 
realisation led to the development of Enhance 2: 
a convenient  yet high-fidelity  tool for stereo 
enhancement. It can be used to adjust balance, 
width and spectral content, while also opening 
up a world of mid/side processing;  all  under 
voltage control and in just 8 HP. 

The  primary stereo parameters are balance 
(moving the sound left or  right) and width 
(making it narrower or wider). The balance circuit 
uses a true constant-power  gain law, while the 
width stage allows for seamless transitions from 
pure mono to extra-wide stereo. 

In addition, tone control is provided by a pair of 
unique, wide-ranging 

mid/side voltage 

controlled tilt filters with selectable corner 
frequency. These make ‘cleaning up’ a muddy-
sounding  mix  straightforward,  but also provide 
unique binaural effects when modulated. 

Mid/side processing encodes the stereo signals 
into one containing only the mono material 
(mid),  and another containing the differences 
between both channels  (side). Apart from the 
internal tilt filters, mid/side outputs  also  enable 
external signal processing  such as compression 
or reverberation. An integrated mid/side decoder 
returns the results back to standard stereo. And 
at all times, a LED bar phase meter ensures that 
phase correlation can be easily maintained. 

Stereo field modulation,  mid/side equalisation 
and beyond;  Enhance 2  brings  true  analogue 
stereo control to the Eurorack world. 

CONTENTS 

In the Enhance 2 box, you’ll find: 

 

Product card, stating serial number and 
production batch. 

 

16-to-10-pin Eurorack power cable. 

 

Mounting hardware: two black M3 x 6 mm 
hex screws, two black nylon washers and a 
hex key. 

 

The Enhance 2 module itself, in a protective 
cotton bag. 

If any of these items are missing, please contact 
your dealer or [email protected]

 

 

Reviews: