EN
FR ES
10 Securing the Child
• Carefully place the child in the seat with the shoulder straps over their shoulders and chest. Then place the crotch strap between the
child’s legs.
• Push the shoulder latch posts into the crotch buckle until all parts snap into place.
See Figure 10.1.
• Adjust the shoulder straps to a snug fit by sliding the adjustment ring on the harness.
• To unlatch the buckle, squeeze the two side releases and remove the male ends of each buckle.
See Figure 10.2.
!
WARNING
Avoid serious injury from falling or sliding out. Always use the restraint system.
11 Attaching/Removing the Cup Holder
• To install, snap the cup holder over the handlebar.
See Figure 11.1.
• To remove, simply lift up on the cup holder.
12 Front Wheel Pedal Locking System
• To FREE the front pedals, push the dial in the front wheel towards the FREE position indicated on the wheel. Any arrow on the dial will
work.
See Figure 12.1.
The dial should pop out. This allows the pedals to spin without the force of the wheel.
• To LOCK the front pedals, push the dial in the front wheel towards the LOCK position indicated on the wheel. Any arrow on the dial will
work.
See Figure 12.2.
The dial should stay pushed in. Gently jiggle the front wheel to ensure the lock is secure. This will allow the child
to pedal the tricycle on his own power.
• To prevent injury, the front wheel pedal locking system should be set to FREE when an adult is using the push handle to guide the tricycle.
13 Collapsible Footrest
• To use the footrest, swing the footrest down until it clicks into place. Then unfold the footrest pedals into the down position.
See Figure
13.1.
• Reverse these steps to collapse the footrest.
Maintenance
All of the fittings, snaps, locks, rivets, and other hardware and plastic parts on the tricycle should be inspected periodically to ensure that
they are secured properly and not damaged or malfunctioning. The screws and nuts should also be inspected periodically to ensure that
they are secured properly and not loose or otherwise damaged. All moving parts, such as wheels and hinges should also be checked
periodically to ensure they are operating properly.
Any missing, broken, or worn components should be replaced immediately, and the tricycle should not be used until they are replaced. Only
original manufacturer’s components should be used. If needed, please contact Joovy (USA) or ISSI Inc. (Canada) at our toll-free phone
number.
Color fading may occur if the tricycle is left in direct sunlight for long periods of time. When not in use, store the tricycle out of direct sunlight.
Cleaning
The plastic material on this tricycle can be cleaned using mild household soap and warm water on a sponge or clean cloth. Always allow the
plastic to completely air dry before using the tricycle.
The frame and wheels should always be kept clean and free of dirt and foreign matter, especially after operating the tricycle in rain, snow, or
other harsh environments. Use a sponge or cloth dampened with warm water and a mild household soap to clean the wheels after such use.
SATISFACTION GUARANTEED
We want you to be completely satisfied with your purchase of this product. Should you experience any difficulty in
assembling or using this product, or if you have any questions, please contact our Customer Service Department:
UNITED STATES – Joovy: (877) 456-5049, Hours 8:30 am – 5:00 pm Central Time.
CANADA – ISSI Inc.: (800) 667-4111, Hours 8:30 am – 5:00 pm Eastern Time.
Please log onto www.joovy.com to register your new Joovy product.
