JS-3 Jet Sustainer
Flight Manual Supplement
JS03-AFM-00-002
Issue: 00.32JS
Rev. 00.32JS
Rev. Date: 08.02.2019
Page 4
–14
4.9 In-flight operating procedures
Inflight start procedure
4.9.1
The inflight start procedure is as follows:
1. Ensure fuel shut off switch, positioned on the left-hand side of the
cockpit, is in the “OPEN” (forward) position.
2.
Move the Jet Master Switch on the JDU to the “ON” position.
3. Maintain a safe airspeed: 100 km/h (54 kts) to 120 km/h (65 kts).
4.
Move the Jet Control Switch to the “RUN” position.
5. After a successful start-up, the engine will spool up to a pre-set
condition. (IDLE setting is the factory default)
6. After the RPM and EGTs has stabilized at idle (30000 RPM), the
thrust can be adjusted using the “Thrust Control Dial”.
Jet Master
Switch
Jet Control
Switch
Jet Thrust
Dial