Jolly Roger INTERNATIONAL SPEEDWAY CAR CAROUSEL, Handbook

Page: 12 / 34

JOLLY ROGER AMUSEMENT RIDES
Stamar “Plug n Play” Kiddie Ride Controller Configuration Instructions
4.8 The new “Plug n Play” programmable control unit has four externally accessible DIL switches, SW1,
SW2, SW3 and SW4, which are used to select the most popular modes of operation.
NOTES
1. It is advisable to remove the control unit from the ride as this will assist viewing the switches and
referring to these instructions. The control unit can be easily “unplugged” from the ride AFTER POWER
TO THE RIDE HAS BEEN SWITCHED OFF and the two mounting bolts have been removed.
2. All alterations to these switches should only be made after power to the ride has been turned off as this
will avoid any unintentional damage to the control unit and/or the ride.
Fig 1 Programmable Control Unit
Page 10