Jolimark BP-1000K (Model B), User Manual

Page: 8 / 44

BP-1000K User’s Manual
2.3 Main Parts of the Printer
Figure 2-3and Figure 2-4 mark the names of main parts.
Upper cover
Upper frame lever
Print head
LCD display
Paper feed knob
Control panel
Ribbon guide board
Power switch
Carriage shaft
Ribbon cartridge
Figure 2-3 Main parts of the printer (Front view)
Parallel interface
USB interface
Power supply inlet
Tractor (Optional)
Printer rear cover
Figure 2-4 Main parts of the printer (back view)
★
According to specific interface standards
2.4 Installing the Printer
2.4.1 Choose Proper Installing Place
When choosing the installing place please consider following problems:
1. The laying place must be plane and fixing.
2. When printing tractor papers, the paper must be fed through the rear of the printer. So you should
leave enough space for safety printing. If you put the tractor paper on the floor, the horizon
minimum range between the printer and the paper should over 30mm. The printer should be place
where backside of the printer is away the wall over 60cm, which avoid the paper break off from the
tractor (optional).
3. Easy for operation, the table board should not be too high, it can be suitable about 60cm.
2.4.2 Installing the Paper Feed Knob
1. Insert the paper feed knob into the fixing hold on the right on the printer (Show as figure 2-5).
- 4 -