BP-1000K
User’s Manual
Wire clips
Parallel cable
Parallel interface
Figure 2-13 Connecting the parallel interface
2.5.2 Connecting the USB Interface
1. Plug the USB cable A end (flat shape) into the computer's USB interface.
2. Plug the USB cable B end (square shape) into the printer's USB interface.
Caution: Don’t impact the plug after connecting to the USB interface.
USB cable
USB Interface
Figure 2-14 Connecting the USB interface
2.6 Connect the Power Core
1. Make sure the power switch on the printer is turned off.
2. Make sure the voltage required by the printer matches that of your electrical outlet.
3. If the power cord is not attached to the printer, connect it to the power supply inlet on the
printer.
4. Plug the power cord into a properly grounded electrical outlet. (show as figure 2-15)
Power cord
Power supply inle
t
Electrical outlet
Figure 2-15 Connecting the power cord to the printer
- 8 -
Summary of Contents for BP-1000K (Model B)
Page 1: ...User s Manual BP 1000K Model B...
Page 20: ...BP 1000K User s Manual Figure 3 8 Tearing the tractor paper 16...
Page 44: ......
