8
working with accessories
t
Press the adjustment button and
push down the guide bar.
t
Take the power supply cable from
the cable fastening.
t
Pull up the guide rod until it
snaps into place.
t
Switch the machine on (main
switch and plug).
t
Hold the handle of the guide rod
tight and press down on the
pedal inorder to get the machine
into working position.
The electronic suction brush turns
on.
t
Apply machine when cleaning
under beds as follows:
Press the pedal of the suction
aggregate again until it is on the
floor, while in working position
press the pedal of the suction
aggregate until it is seated on the
floor.
Caution:
When the red indicator lights up, adjust the brush height as described bellow.
When the red indicator stays on too long, it can damage the carpets surface.
LED signal
status indicator
green indicator
Brush height properly adjusted
red light
Adjust brush height, turn setting knob to the right or left
Interrupt suction operation for a moment, then lock the machine into the upright position.
The electronical suction brush turns off, inorder to prevent damage to the carpets surface.
t
Lock the machine into the
upright position
The electronic suction brush turns
on.
t
Attach the crevase nozzle to the
flexible suction hose or suction
pipe.
t
When finished working, put accessories back into the original position
