Johnson JET 6000, Service Manual

Page: 41 / 62

RUNNING BELT/DECK/ROLLER REPLACEMENT
Tools required:
ü
Philips
screwdriver
ü
T-handle key
(8mm,5mm)
Procedure:
5. Turn the flywheel
counterclockwise by using
your left hand and pull out
the drive belt from the
wheel by using your right
hand.
6. Remove the bolts from
the front and rear rollers
by using the T-handle key
(8mm).
7. Remove the front roller,
drive belt and rear roller.
(If replacing the roller, go to
step 13.)
8. Remove the 8 screws
holding the deck to the frame
then remove the deck with the
running belt.
(If replacing
the running deck, go to step
12.)
9. Remove the deck
extension with screwdriver.
10. Flip and rotate the deck and tighten the deck extension, then
install a new running belt.
11. Refer to "REWAXING THE DECK PROCEDURE" for how
to lubricate the deck. Or, skip this step if replacing the deck.
(Go to step 14.)
7-1 Revision: 1.0 Date: 2001-06-01