Johnson Controls YORK YVAM 0350, Operation & Maintenance Manual

Page: 70 / 162

Printer screen
Figure 33: Printer screen
This screen allows definition of the necessary communications parameters for the printer. See
Printing for details on printer connections and setup.
Table 59: Display only fields
Field/LED name Description
Time Remaining Until Next
Print
Displays the time until the next print log will occur, if the function is enabled.
Table 60: Programmable
Button Access Description
Log Start Time Operator Set the time at which scheduled print logs will begin.
Output Interval Operator Define the interval at which log printing will occur.
Automatic Printer Logging
(Enabled/Disabled)
Operator Enable the printer to begin printing status reports beginning at the
programmed start time and recurring at the interval defined above.
Printer Type Operator Define the printer type connected to the chiller system.
Print Report Operator Select the report type to print when the Print Report key is selected. This
can vary from Status report (present system parameters), Setpoints report
(present value of the system setpoints), Schedule report (present value of the
system schedule times), or a Sales Order Data report (information provided
on the Sales Order screen). A print report is generated upon completion of
selection.
Print All Histories Operator Generate a report of the system data at the time of all stored shutdowns.
Table 61: Navigation
Button Description
Home Returns to the Home screen.
Setup Returns to the Setup screen.
YVAM Control Center 70