UPSPNL550-0 Panel Installation Instructions
1
Applications
The UPSPNL550-0 provides temporary backup power to computers, networking devices, and other devices of
similar load demand where power interruptions cause outages. The UPS supplies power long enough for
equipment to safely and correctly shut down. Follow all power ratings and load requirement limitations for best
results. Test units periodically for performance compliance because performance degrades with time and the
number of charge and discharge cycles.
North American Emissions Compliance
United States
Canada
Installation and Operation
For details on installation and operation of the CyberPower UPS, refer to the CyberPower User’s Manual on the
inside of the panel door.
Special Tools Needed
Use standard panel mounting tools.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
This Class (B) digital apparatus meets all the requirements of the Canadian Interference-Causing Equipment
Regulations.
Cet appareil numérique de la Classe (B) respecte toutes les exigences du Règlement sur le matériel brouilleur
du Canada.
UPSPNL550-0 Panel
Installation Instructions
24-11092-00007, Rev. A
24- 11092- 00007, Rev . A
Part No. 24-11092-00007, Rev. A
Issued June 2018
(barcode for factory use only)
