Enrolling a keypad/zone expander/power supply
To enroll a keypad on to the module, complete the following steps:
1. Select
Settings
>
Advanced Settings
>
Installation
>
Devices
>
Security Sensors
.
a.
To automatically enroll all keypads and modules that are correctly wired to the module,
select
Auto Learn
.
b.
To manually enroll a keypad that is correctly wired to the module, select
Add Sensor
.
Enter the module serial number, 460-XXXX, then select
Corbus
from the Hardwired
Input drop-down menu and enter the keypad or module serial number.
27
PG8HRDW8 and PG9HRDW8 IQ Hardwire PowerG Wired to Wireless Converter Installation Manual
