Johnson Controls tyco iSTAR Ultra, Installation And Configuration Manual

Page: 42 / 118

Installation
2–18 iSTAR Ultra Installation and Configuration Guide
IP-ACM Installation
The IP-ACM is mounted separately from the Ultra GCM in a plastic or metal enclosure. The
following sections describe the enclosures and their installation with the IP-ACM board.
Plastic Enclosure
Figure 2-2: Plastic Enclosure for the IP-ACM
Requirements

The anchoring system must be capable of sustaining 25lb (11.4kg). This weight does not
include the cables.

The cables are protected by use of conduit, which is metal, plastic, or flexible cable grip
strain relief.

12VDC or 24VDC local power or Power over Ethernet (PoE or PoE+) .
NOTE
See the
IP-ACM Ethernet Door Module Quick Start Guide
for power and
cabling
requirements.
Table 2-12: IP-ACM and Reader Plastic Enclosure Dimensions
Item Dimension
Weight 2.2lb (1kg)
Height 12.1in (307mm)
Width 7.2in (183mm)
Depth 2.46in (62.4mm)