TEC2045-4 Wireless Thermostat Controller with Single Proportional Output and One-Speed Fan Control
Installation Instructions
14
Repair Information
If the TEC2045-4 Wireless Thermostat Controller fails
to operate within its specifications, replace the unit. For
a replacement thermostat controller, contact the
nearest Johnson Controls representative.
Table 6: Display Messages
Display
Function
Service
Indicates that there is a service alarm in accordance with the programmable Binary Input (BI2).
Filter
Indicates that the filter(s) is dirty in accordance with the programmable Binary Input (BI2).
Window
Indicates that an outside window or door is open and has cancelled the thermostat controller heating or
cooling action in accordance with the programmable Binary Input (BI1).
Table 7: Accessories (Order Separately)
Code Number
Description
SEN-600-4
1
Remote Indoor Air Temperature Sensor with Occupancy Override and LED
TE-6361M-1
2
Duct Mount Air Temperature Sensor
TE-636S-1
Strap-Mount Temperature Sensor
TEC-6-PIR
3
Commercial Fan Coil Controller Cover for Occupancy Sensor
TEC20-A-1
Replacement Antenna for TEC20 Coordinator
TEC20-RA-1
4
Remote Antenna for TEC20 Coordinator
NPB-PWR
5
DIN Rail Mount 24 VAC/DC Power Module for TEC20 Coordinator
TEC20-8X-1
120 VAC to 15 VDC Power Supply for TEC20 Coordinator
TEC20-9B-1
Replacement Battery Pack for TEC20 Coordinator
1.
Only the occupancy override function can be accomplished using the SEN-600-4 with the TEC2045-4.
2.
Additional TE-636xx-x Series 10k ohm Johnson Controls Type II Thermistor Sensors are available; refer to the
TE-6300 Series Temperature Sensors Product Bulletin (LIT-216320)
for more details.
3.
The TEC-6-PIR Accessory Cover can be used to replace the existing cover on a non-PIR TEC2045-4 Thermostat
Controller to provide occupancy sensing capability.
4.
This antenna is used when the TEC Coordinator is installed inside a metal cabinet, or when a remote antenna is required by
physical installation.
5.
DIN Rail: Type NS35/7.5 (35 x 7.5 mm) and DIN rail end clips. Length of DIN rail depends on the number of DIN rail
mounted options.
