Engineering manual - UniSAB III 1.10.8
001930 en 2021.06
231/346
6.5.4
Date-time
This picture shows the
time
in hours, minutes and seconds and
the
date
as
Day
,
Month
and
Year
.
Date and time must be set correctly in order for the shutdowns to be stored with the correct time. This
function has a battery back-up.
6.5.5
Oil charging (screw compressor)
Provided that the compressor is fitted with an oil charging pump the pump can be started in the picture
Oil charging
:
To start the pump, proceed as follows:
Place the cursor on
Run timer
. Set the time that the pump is going to run and place the cursor on
Start
oil pump
. Change
No
to
Yes
and confirm by pressing
.
The pump will now start and run for the set period. If the pump should stop before time expiry, select
No
in the third line. The pump will now stop and
run timer
drop to 0.
Summary of Contents for SABROE Unisab III Control
Page 1: ...UniSAB III control Version 1 10 8 Engineering manual EN...
Page 2: ......
Page 347: ......