Operating manual - HeatPAC with reciprocating compressor
009332 en 2021.07
57/62
•
Press
Arrow up
(no. 4) until 1 has turned to 3, see Fig. 34.
Fig. 34
2.
Change the gas constant:
•
Press
Arrow right
(no. 1) – the bottom line is marked.
•
Change the digit to wanted number by pressing
Arrow right
(no. 1),
Arrow down
(no.
3) and
Arrow up
(no. 4), see Fig. 35.
Fig. 35
•
Confirm with
Return
(no. 2), see Fig. 36.
Fig. 36
Return
(no. 2) always takes you up one level.
Change the following parameters in the same way:
•
+ 2.3.2 Blocking distance from 50 mm to 0 mm
•
+ 2.3.3 Time constant from 5 sec. to 1 sec.
•
+ 2.5.7 Level threshold from 200 mm to 150 mm
•
+ 4.1.1 Full area - confirm or change to 0 mm. Passcode for level 4.x.x = 4-3-4-2-4-1
•
+ 4.1.2 Empty Area from 280 mm to 260 mm.
After the last change, press
Return
(no. 2) until “STORE NO” is displayed, see Fig. 37.
Summary of Contents for SABROE HeatPAC
Page 1: ...HeatPAC with reciprocating compressor Operating manual EN ...
Page 2: ......
Page 63: ......
