VFD68 Variable Frequency Drives (575 VAC)
3
VFD68 Variable Frequency Drives (575 VAC)
Introduction
The VFD68 Variable Frequency Drives are designed to provide three-phase motor speed control in a variety of
HVACR applications. The VFD68 Drives are factory-configured for condenser fan speed control on HVACR
condensing units. You can quickly and easily reconfigure the VFD68 Drives to control variable speed pumps in
cooling and heating applications, or to drive variable speed supply fans in VAV applications.
This document provides information for VFD68Dxx (575 VAC) Drive models only. For information pertaining to
VFD68Bxx (230 VAC) and VFD68Cxx (460 VAC) Drive models, refer to the
VFD68 Variable Frequency Drive
(230 or 460 VAC) Installation Instructions (Part No. 24-7664-3108
).
Note:
The VFD68 Drive cannot drive motors in conveyor systems or robotic applications.
Note:
Do not attempt to install, operate, maintain, or inspect the VFD68 Drive until you have read through
this document carefully and can use the equipment correctly. Do not use this product until you fully
understand the equipment, safety information, and instructions.
To view the
VFD68 Variable Frequency Drive Technical Bulletin (Part No. 24-7664-3051)
, which covers
230 VAC, 460 VAC, and 575 VAC models, visit the following web address:
http://cgproducts.johnsoncontrols.com/MET_PDF/2476643051.pdf
North American Emissions Compliance
United States
Canada
IMPORTANT:
Use this VFD68 Variable Frequency Drive only as an operating control. Where failure or
malfunction of the
VFD68 Drive could lead to personal injury or property damage to the controlled equipment
or other property, additional precautions must be designed into the control system. Incorporate and maintain
other devices, such as supervisory or alarm systems or safety or limit controls, intended to warn of or protect
against failure or malfunction of the VFD68 Drive.
IMPORTANT:
Utiliser ce VFD68 Variable Frequency Drive uniquement en tant que dispositif de
régulation. Lorsqu'une défaillance ou un dysfonctionnement du VFD68 Drive risque de provoquer des
blessures ou d'endommager l'équipement contrôlé ou un autre équipement, la conception du système de
contrôle doit intégrer des dispositifs de protection supplémentaires. Veiller dans ce cas à intégrer de façon
permanente d'autres dispositifs, tels que des systèmes de supervision ou d'alarme, ou des dispositifs de
sécurité ou de limitation, ayant une fonction d'avertissement ou de protection en cas de défaillance ou de
dysfonctionnement du
VFD68 Drive.
This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when this equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment in
a residential area may cause harmful interference, in which case users will be required to correct the
interference at their own expense.
This Class (A) digital apparatus meets all the requirements of the Canadian Interference-Causing
Equipment Regulations.
Cet appareil numérique de la Classe (A) respecte toutes les exigences du Règlement sur le matériel
brouilleur du Canada.
