Johnson Controls PENN ACT2, Technical Bulletin

Page: 6 / 116

Maestro Software
6
Key Concepts
Computer System Requirements
Minimum computer system requirements to use the Maestro software
include:
•
IBM

Compatible 486 computer or better
•
8 Mb RAM
•
8 Mb free disk space
•
Windows

3.1, Windows 95, or Windows 98
•
mouse
In addition, if direct connection with an ACT2 controller or ACT2
network is desired, an open serial port is needed. If remote connection
with an ACT2 controller is desired, a Hayes

compatible, 9600 baud
or better modem is needed.
About this Bulletin
Each section in this bulletin contains the following four subsections:
•
Introduction: The introduction gives a brief overview of the
topics covered in that chapter and an explanation of how those
topics are useful.
•
Key Concepts: This subsection defines key terms for the topics in
that chapter, including parameter definitions and location.
•
Procedure Overview: This subsection summarizes the steps
needed to complete the actions covered in that chapter. It is useful
as a quick reference for someone already familiar with the Maestro
software.
•
Detailed Procedure: This subsection gives a more detailed
description, including screen illustrations, of the steps needed to
carry out the tasks in that chapter.
This bulletin uses bold lettering to indicate menu selections and
parameters that are found in the Maestro software.