Technical Specifications
Table 11: NAE55xx-2 and NIE55xx-2
Dedicated nominal 24 VAC, Class 2 power supply (North America), SELV power supply
(Europe), at 50/60 Hz (20 VAC minimum to 30 VAC maximum)
Power Requirement
50 VA maximum
Power Consumption
0 to 50°C (32 to 122°F); 10 to 90% RH, 30°C (86°F) maximum dew point
Ambient Operating Conditions
-40 to 70°C (-40 to 158°F); 5 to 95% RH, 30°C (86°F) maximum dew point
Ambient Storage Conditions
Supports data protection on power failure. Rechargeable gel cell battery: 12 V, 1.2 Ah, with
a typical life of 3 to 5 years at 21°C (70°F); Product Code Number: MS-BAT1010-0
Data Protection Battery
Maintains real-time clock through a power failure. Onboard cell; typical life 10 years at 21°C
(70°F)
Clock Battery
1.6 GHz Intel
®
Atom
™
processor for MS-NAE55xx-2 models
Processor
4 GB Flash nonvolatile memory for operating system, configuration data, and operations data
storage and backup for MS-NAE55xx-2 models.
1 GB Synchronous Dynamic Random Access Memory (SDRAM) for operations datadynamic
memory for all models
Memory
Microsoft
®
Windows
®
Embedded Standard 2009
Operating System
One Ethernet port; 10/100/1,000 Mbps; 8-pin RJ-45 connector
Two optically isolated RS-485 ports; 9,600, 19.2k, 38.4k, or 76.8k baud; pluggable and keyed
4 position terminal blocks (RS-485 terminal blocks available on NAE55 models only)
Two RS-232-C serial ports, with standard 9-pin sub-D connectors, that support all standard
baud rates
Two USB serial ports; standard USB connectors support an optional, user-supplied external
modem
Options: One telephone port for internal modem; up to 56 kbps; 6-pin RJ-12 connector One
L
ON
W
ORKS
port; FTT10 78 Kbps; pluggable, keyed 3-position terminal block (L
ON
W
ORKS
port
available on NAE552x-x models only)
Network and Serial Interfaces
Plastic housing with internal metal shield
Plastic material: ABS + polycarbonate; Protection: IP20 (IEC 60529)
Housing
On flat surface with screws on four mounting feet or on dual 35 mm DIN rail
Mounting
226 x 332 x 96.5 mm (8.9 x 13.1 x 3.8 in.) including mounting feet
Minimum space for mounting: 303 x 408 x 148 mm (12.0 x 16.1 x 5.8 in.)
Dimensions(Height x Width x
Depth)
2.9 kg (6.4 lb)
Shipping Weight
United States
: UL Listed, File E107041, CCN PAZX, UL 916, Energy Management Equipment,
FCC Compliant to CFR47, Part 15, Subpart B, Class A
Compliance
Canada
: UL Listed, File E107041, CCN PAZX7, CAN/CSA C22.2 No. 205, Signal Equipment,
Industry Canada Compliant, ICES-003
Europe
: CE Mark - Johnson Controls, Inc., declares that this product is in compliance with
the essential requirements and other relevant provisions of the EMC Directive 2004/108/EC.
Australia and New Zealand
: C-Tick Mark, Australia/NZ Emissions Compliant
BACnet International
: BACnet Testing Laboratories
™
(BTL) 35-2004 Listed BACnet Building
Controller (B-BC)
The performance specifications are nominal and conform to acceptable industry standard. For application at conditions
beyond these specifications, consult the local Johnson Controls
®
office. Johnson Controls, Inc. shall not be liable
for damages resulting from misapplication or misuse of its products.
13
NAE55/NIE55 Installation Instructions
