Johnson Controls METASYS, User Manual

Page: 49 / 82

Adding a One
-
Time Schedule
To add a one
-
time schedule:
1. Select a system, an object, the SCHEDULE command, ONE
-
TIME,
then ADD.
2. Enter a new schedule date and time.
3. Enter the new adjust value, the new command, or the new setpoint.
Modifying a One
-
Time Schedule
To modify a one
-
time schedule:
1. Select a system, an object, the SCHEDULE command, ONE
-
TIME,
then MODIFY.
2. Enter a new schedule date and time.
3. Enter the new adjust value, the new command, or the new setpoint.
Deleting Schedules
To delete a schedule, select a system, an object, the SCHEDULE
command, WEEKLY or ONE
-
TIME, then DELETE.
Scheduling a change to an AD object is similar to scheduling other
objects, with one exception: After you select the system, the object, and
the SCHEDULE command, you have to select either
ADJUST or
WARNING . You can add only four schedules.
Scheduling AD
Objects
Then, follow the procedure for scheduling other objects, beginning with
the selection of the WEEKLY or ONE
-
TIME commands.
Network Terminal User’s Manual 49