About MC-303 PG+
The MC-303 PG+ is a thin, ultra-long-life PowerG magnetic contact device that is compatible with
Johnson Controls’ PowerG control panels.
The MC-303 PG+ includes a built-in reed switch that opens a circuit when the magnet is moved from
its usual position. The device has the following features:
•
Two-way PowerG communication with the control panel
•
Front and back cover tamper detection
•
LED light signal strength indication during installation
•
Discreet transmission of supervision message
•
PowerG two-way frequency hopping spread spectrum time-division multiple access (FHSS-
TDMA) technology
•
Low battery indication
•
Remote firmware upgrade
Warranty
Visonic Ltd. (“
Seller
”) warrants the Products to the original purchaser only (the “
Buyer
”) against
defective workmanship and materials under normal use of the Products for a period of twelve (12)
months from the date of shipment by the Seller.
This Warranty is absolutely conditional upon the Products having been properly installed,
maintained and operated under conditions of normal use in accordance with the Seller's
recommended installation and operation instructions. Products which have become defective
for any other reason, according to the Seller's discretion, such as improper installation, failure to
follow recommended installation and operational instructions, neglect, willful damage, misuse or
vandalism, accidental damage, alteration or tampering, or repair by anyone other than the Seller,
are not covered by this Warranty.
There is absolutely no warranty on software, and all software products are sold as a user license
under the terms of the software license agreement included with such Product.
The Seller does not represent that Products may not be compromised and/or circumvented or that
the Products will prevent any death and/or personal injury and/or damage to property resulting
from burglary, robbery, fire or otherwise, or that the Products will in all cases provide adequate
warning or protection. The Products, properly installed and maintained, only reduce the risk of such
events without warning and it is not a guarantee or insurance that such events will not occur.
Conditions to Void Warranty
: This warranty applies only to defects in parts and workmanship
relating to normal use of the Products. It does not cover:
•
damage incurred in shipping or handling;
•
damage caused by disaster such as fire, flood, wind, earthquake or lightning;
•
damage due to causes beyond the control of the Seller such as excessive voltage, mechanical
shock or water damage;
•
damage caused by unauthorized attachment, alterations, modifications or foreign objects
being used with or in conjunction with the Products;
•
damage caused by peripherals (unless such peripherals were supplied by the Seller;
•
defects caused by failure to provide a suitable installation environment for the products;
•
damage caused by use of the Products for purposes other than those for which they were
designed;
•
damage from improper maintenance;
MC-303 PG+ Vanishing Door/Window Magnetic Contact Installation Guide
8
D-308437 MC-303 PG+ Rev. 0
