Johnson Controls IFC-3030, Programming Manual

Page: 76 / 156

76 IFC-3030 Programming Manual — P/N 52025:C 08/05/2005
Alter Status Control On/Off Point Select
ACCEPT:
Press to save changes made on this screen and to return to the previous screen.
4.8 Control On/Off Point Select
This screen may be used to force a control module (SLC or panel circuit) off if it is on, or on if it is
off.
Figure 4.15 Control On/Off Point Select Screen
Soft Keys
POINT:
Press this soft key to enter the point address to be forced on or off.
NEXT/PREVIOUS SELECTION:
Press to progress to the next or previous point on the loop.
ACCEPT:
Press to continue to the Control On or Control Off screen.
4.8.1 Control Off
One of the following two screens will display when a point is selected and accepted in the previous
screen.
If the selected point is active, the Control Off screen will appear.
L A K E V I E W G E N E R A L H O S P I T A L
S Y S T E M N O R M A L
1 0 : 2 2 : 3 4 A F R I S E P 2 5 , 2 0 0 4
P O I N T S E L E C T
P O I N T : L y y M z z z ( M O D U L E )
N E X T S E L E C T I O N A C C E P T
P R E V I O U S S E L E C T I O N B A C K
NOTE: A module with a releasing Type ID can not be forced.