Johnson Controls IFC-3030, Programming Manual

Page: 68 / 156

68 IFC-3030 Programming Manual — P/N 52025:C 08/05/2005
Alter Status Detector Sensitivity
The current sensitivity values displayed are described in Detector Point Programming (Refer to the
paragraph “Sensitivity” on page 41 ) and in Appendix D, “AWACS™ Applications”
Figure 4.5 Detector Sensitivity Select Screen
Soft Keys
OCCUPIED ALARM SENSITIVITY
:
OCCUPIED PREALARM SENSITIVITY:
UNOCCUPIED ALARM SENSITIVITY:
UNOCCUPIED PREALARM SENSITIVITY:
Change Alarm/Prealarm Sensitivity
This screen displays when any of the soft keys is pressed on the Detector Sensitivity Select screen.
The user can change detector sensitivity values using this screen.
The settings (1-9) displayed below the soft key are unique to the type of detector.
Figure 4.6 Change Alarm Sensitivity Screen
Soft Keys
L A K E V I E W G E N E R A L H O S P I T A L
S Y S T E M N O R M A L
1 0 : 2 2 : 3 4 A F R I S E P 2 4 , 2 0 0 4
A D D R E S S : L 0 3 D 0 5 2
A U T O M A T I C I N A C T I V E
E L E V A T O R L O B B Y E A S T W I N G
F I F T H F L O O R Z 0 0 3 S M O K E ( P H O T O )
O C C U P I E D A L A R M U N O C C U P I E D A L A R M
S E N S I T I V I T Y = 7 S E N S I T I V I T Y = 5
O C C U P I E D P R E A L A R M U N O C C U P I E D P R E A L A R M
S E N S I T I V I T Y = 5 S E N S I T I V I T Y = 3
B A C K
Press the soft key next to one of
these setting categories to proceed
to the next screen, where the
setting value may be changed.
L A K E V I E W G E N E R A L H O S P I T A L
S Y S T E M N O R M A L
1 0 : 2 2 : 3 4 A F R I S E P 2 4 , 2 0 0 4
A D D R E S S : L 0 3 D 0 5 2
A U T O M A T I C I N A C T I V E
E L E V A T O R L O B B Y E A S T W I N G
F I F T H F L O O R Z 0 0 3 S M O K E ( P H O T O )
O C C U P I E D A L A R M = 6 ,
1 = 0 . 5 0 % , 6 = 1 . 6 6 %
2 = 0 . 7 3 % , 7 = 1 . 8 9 %
3 = 0 . 9 6 % , 8 = 2 . 1 2 % A C C E P T
4 = 1 . 1 9 % , 9 = 2 . 3 5 %
5 = 1 . 4 3 % ,
B A C K