Johnson Controls IFC-3030, Programming Manual

Page: 52 / 156

52 IFC-3030 Programming Manual — P/N 52025:C 08/05/2005
Program Point Program
Refer to Appendix B, “Releasing Applications” for a full explanation of the fields below.
Soft Keys
DELAY TIME:
Press this soft key to type a value from 0 to 60 (seconds). Default 00
ABORT SWITCH:
Press this soft key to scroll through the selection list of ULI, IRI, NYC, or AHJ.
Default:ULI
CROSS ZONE:
Press to scroll through the selection list of YES, NO, ZONE, HEAT. Default: NO.
SOAK TIME:
Press to type a value from 0 to 9999 (seconds). Default: 0000
3.4.6 Logic Zone
Logic Zone Programming
This screen displays when a logic zone is entered at the Point Programming Menu (see Figure 3.23
on page 37 ).
The logic equation for that zone will display in line 6. Line 4 indicates the current state of the logic
zone (ON or OFF). If there is no equation at the logic zone number entered, nothing will display in
lines 4 and 6, and the user must press the
EDIT EQUATION
soft key to proceed to the next screen
and enter an equation.
Refer to Appendix E, “CBE: Zones and Equations” for information on how to create a logic
equation, and how logic equations operate.
Figure 3.40 Logic Zone Programming Menu Screen
Soft Keys
EDIT EQUATION:
Press to proceed to the edit screen to add or edit a logic equation.
NEXT/PREVIOUS EQUATION:
Press to view the next or previous logic equation.
L O G I C Z O N E P R O G R A M M I N G M E N U
L O G I C Z O N E Z L x x x x
A U T O M A T I C O F F
A N D ( Z 2 0 , O R ( L 2 D 1 5 9 , L 2 D 1 4 ) )
E D I T E Q U A T I O N
N E X T E Q U A T I O N A C C E P T
P R E V I O U S E Q U A T I O N B A C K