Johnson Controls IFC-3030, Programming Manual

Page: 18 / 156

18 IFC-3030 Programming Manual — P/N 52025:C 08/05/2005
Program Panel Program
When programming the panel for the first time, press the
DELETE PROGRAM MENU
soft key,
which brings up the Delete Program Menu screen (Refer to Figure 3.46). Press the
CLEAR ALL
PROGRAMMING
button, then
ACCEPT
, to ensure that the panel is set to defaults and clear of
programs.
The logical sequence for initial programming is to program the panel parameters first, then to
program the individual points through autoprogramming and/or point programming.
3.2 Panel Program
Panel programming provides the means to change settings for the panel system as a whole, as well
to address and program annunciator points.
3.2.1 Panel Program Menu (1)
Press the Panel Program Menu for the following choices.
Figure 3.2 Panel Program Menu 1 Screen
NOTE: Clearing all programs is not necessary when initial programming with a database
downloaded from VeriFireVeriFire™ Tools.
P A N E L P R O G R A M M E N U
N E T W O R K P A R A M E T E R S L C D D I S P L A Y
A C S P R O G R A M M I N G
P A N E L S E T T I N G S S U P E R V I S I O N
P A N E L T I M E R S M O R E
B A C K