Johnson Controls IBPN-M-IS12-0, Quick Start Manual, Page: 1 / 2

In the box (IBWS-M-ISWB-0)

1 x Wall bracket mount

2 x Mounting screws (these attach the camera to the mount)

4 x Screws and screw anchors

1 x Safety lanyard (plus two spare lanyard ends)

1 x Quick Start Guide

1 x Mounting Template sticker

1 x Mounting plate
Installation tools (IBWS-M-ISWB-0)

Drill

Screwdriver
Mount Installation (IBWS-M-ISWB-0)
1. Place the mounting template sticker on to the mounting surface and
drill four screw holes, cut out a cable hole and then insert the four
screw anchors into the four screw holes.
2. Align the holes on the mounting plate with the holes on the wall
mount base (1) (Figure 2) and hold the mounting plate and wall
mount base up to the mounting surface.
3. Align the four holes on the mount base with the four holes on the
surface.
4. Insert the four screws into the four holes on the mounting base and
securely attach the base to the mounting surface.
5. Attach the safety lanyard (2) (Figure 2) to th
e ‘hook’ on the mount
cover
and the ‘hook’ on the camera base.
6. See the Flex Gen 2 Multi-sensor Dome camera QSG at
https://illustracameras.com/cameras/ for instructions to securely
attach the camera to the wall mount.
Security
Q uick S tart G uide
(8200-1938-05_B0)
Flex Gen 2 Multi Sensor Dome Camera
Mounting Accessories Quick Start Guide
Note: You must securely attach one of the camera mounts in the
table below to the surface that you want to attach the camera. When
the mount is installed then the camera is securely attached to the
mount. See the Flex Gen 2 Multi-sensor Dome camera QSG at
https://illustracameras.com/cameras/ for instructions to securely
attach the camera to the four mounts.
Mount Product Code Description on label
IBPN-M-IS12-0 Flex Multi-sensor Ceiling bracket
IBWS-M-ISWB-0 Flex Multi-sensor Wall bracket
IBCR-M-ISWT-0 Flex Multi-sensor In-Ceiling bracket
IBJB-M-ISWB-0 Flex Multi-sensor Junction bracket
In the box (IBPN-M-IS12-0)

1 x Ceiling bracket mount

4 x Screws and screw anchors (attaching the pole to the ceiling)

2 x Mounting screws (attaching the camera to the mount cover)

1 x Safety lanyard (plus two spare lanyard ends)

1 x Quick Start Guide

1 x Mounting Template sticker

1 x Mounting plate (for attaching the pole to the ceiling)

1 x Allen wrench and 1 x Driver bit
Installation tools (IBPN-M-IS12-0)

Drill

Allen wrench

Screwdriver
Mount Installation (IBPN-M-IS12-0)
1. Place the mounting template sticker on to the ceiling and drill four
screw holes, cut out a cable hole and then insert the four screw
anchors into the four screw holes.
2. Align the holes on the mounting plate with the holes on the
mounting pole base (1) (Figure 1) and hold both up to the ceiling.
3. Align the four holes on the mounting pole base with the four holes
on the ceiling.
4. Insert the four screws into the four holes on the mounting plate
and securely attach the mount cover to the mounting pole.
5. Attach the safety lanyard to the
‘hook’ on the mount cover (2)
(Figure 1) and the
‘hook’ on the camera base.
6. See the Flex Gen 2 Multi-sensor Dome camera QSG at
https://illustracameras.com/cameras/ for instructions to securely
attach the camera to the ceiling mount.
Mount Installation (IBPN-M-IS12-0) continued
Figure 1
Mount Installation (IBWS-M-ISWB-0) continued
Figure 2
In the box (IBCR-M-ISWT-0)

1 x In-Ceiling bracket mount

1 x Eye bolt

1 x Quick Start Guide

1 x Mounting Template sticker

2 x Safety lanyard