Figure 3: Micro SD card slot and reset button (continued)
Note:
Remove the two screws on the camera cover (1) (Figure 3) to access
the buttons.
Securely attach the cover when finished.
Table 3: Micro SD card slot and reset button descriptions
Number
Camera button description
1
Camera button cover
2
Micro SD Card slot
3
Reset button (Hold for more than 3 seconds)
Quick reference
Default IP: 192.168.1.168 (DHCP enabled).
Default Username / Password: admin / admin
Power: DC12V
or
PoE
Use Internet Explorer 11 web browser.
Mounting the camera to a wall or ceiling
Ensure that the wall or ceiling is strong enough to withstand three times the
weight of the camera.
1. Place the mounting template on the surface that you want to attach
the camera.
2. On the surface drill three Ø 4.5mm holes and cut out a cable hole as
per the markings identified on the mounting template.
3. Securely place the three screw anchors into the three holes.
4. Place the camera cable through the cable hole on the mounting
surface and ensure that the three cable side entry plugs are inserted
into the three slots on the camera base (2) (Figure 1).
OR
Use a cable side entry hole slot (3) (Figure 1) on the camera base
and ensure that two of the cable side entry plugs are inserted into the
remaining two slots on the camera base.
Security
Q
uick
S
tart
G
uide
(8200-1994-01_D0)
Tyco Holis JSE Economical 4MP Turret Camera
(Product Code: JSE04-T02-BI01)
In the box
1 x Camera
1 x Quick Start Guide
3 x PA 4x25mm Tapping screws
1 x L-Key Hexagonal wrench
1 x Mounting template
3 x 6x25mm Plastic screw anchors
3 x Silicone plugs
1 x Regulatory Document
Installation tools
Screwdriver
Drill
L-Key Hexagonal wrench
Figure 1: Camera parts
Figure 1
Table 1: Camera part descriptions
Number
Camera part description
1
Camera lens
2
Camera base
3
Cable side entry slot
4
Fixed screw
Figure 2: Cable connections
Figure 2
Table 2: Cable connection descriptions
Number
Cable connection description
1
Ethernet Connector and also supports PoE
2
Power Connector (12V DC @ 1A)
Figure 3: Micro SD card slot and reset button
Figure 3
Mounting the camera to a wall or ceiling (continued)
5. Hold the camera up to the mounting template and align the three
holes on the camera base with the three holes on the mounting
surface.
6. Insert the three tapping screws into the three holes on the camera
base and securely attach the camera to the mounting surface.
7. To power up the camera:
Connect a 12V DC power supply to the power connector on the
camera cable.
OR
Connect a shielded PoE cable to the ethernet / PoE slot on the
camera cable.