manualshive.com logo in svg

Johnson Controls FMS-2000C, User Manual, Page: 30 / 62

Share
Download
Johnson Controls FMS-2000C User Manual Download Page 30

FMS-2000C

LIT-12013504

30

Configuring the analog input for use with an external thermostat

If you are using an external thermostat, you can display the temperature readings on the FMS-2000C display, but all temperature 

adjustments need to be made on the external thermostat. To use an external thermostat, use AI-2 and Thermistor 1.

After you have completed the configuration of the analog input, configure the analog output for temperature. See 

Configuring the analog 

output for temperature control

.

Configuring the analog input type to an external thermostat

1.  On the home screen, tap the 

Settings

 icon to enter the 

Settings

 menu.

2.  To view analog input settings, tap 

Analog I/O

.

3.  Swipe left once to get to the 

ANALOG 2

 screen.

4. 

To configure the analog input type to the external thermostat, tap the 

Type 

arrow.

5.  On the 

Type

 screen scroll to 

Thermostat

.

6. 

To confirm the settings, tap the 

Checkmark

 icon.

Adjusting the comfort range for an external thermostat

To configure the allowable temperature range for the user, complete the following steps:

1.  On the home screen, tap the 

Settings

 icon to enter the 

Settings

 menu.

2.  To view analog input settings, tap 

Analog I/O

.

3.  Swipe left once to get to the 

ANALOG 2

 screen.

4.  To adjust the comfort range, tap the 

Comfort Range

 arrow.

5.  On the 

Comfort Range

 screen, scroll up or down to select a temperature range.

6. 

To confirm the new settings, tap the 

Checkmark

 icon.

Naming an external thermostat

Set up a name for the external thermostat that you want to appear on the home screen. If your FMS-2000C controller is in portrait mode, 

you can have up to 16 characters. If your FMS-2000C controller is in landscape mode, you can have 12 characters.

1.  On the home screen, tap the 

Settings

 icon to enter the 

Settings

 menu.

2.  To view analog input settings, tap 

Analog I/O

.

3.  Swipe left once to get to the 

ANALOG 2

 screen.

4.  To set up a new name for the external thermostat, scroll down and tap the 

Name

 arrow.

5.  On the 

Name

 screen enter a new name.

6. 

To confirm the new name, tap the 

Checkmark

 icon.

Setting up the NTC type for the thermistor inputs

Specify which type of NTC thermistor connects to the FMS-2000C controller.

1.  On the home screen, tap the 

Settings

 icon to enter the 

Settings

 menu.

2.  To view analog input settings, tap 

Analog I/O

.

3.  Swipe left four times to get to the 

THERMISTOR 1

 screen.

4.  To specify the NTC Type, expand 

NTC Type

 and choose from the following options:

• 

NTC Type 2

• 

NTC Type 3

5.  To save the new settings, collapse 

NTC Type

.

Specifying the occupied setpoint for the thermistor inputs

1.  On the home screen, tap the 

Settings

 icon to enter the 

Settings

 menu.

2.  To view analog input settings, tap 

Analog I/O

.

3.  Swipe left four times to get to the 

THERMISTOR 1

 screen.

4.  To adjust the temperature you want to maintain when the space is occupied, tap the 

Occupied Setpoint

 arrow and enter a 

temperature value.

5. 

To confirm the new settings, tap the 

Checkmark

 icon.

Specifying the unoccupied setpoint for the thermistor inputs

1.  On the home screen, tap the 

Settings

 icon to enter the 

Settings

 menu.

2.  To view analog input settings, tap 

Analog I/O

.

3.  Swipe left four times to get to the 

THERMISTOR 1

 screen.

4.  To adjust the temperature you want to maintain when the space is unoccupied, tap the 

Unoccupied Setpoint

 arrow and enter a 

temperature value.

5. 

To confirm the new settings, tap the 

Checkmark

 icon.

Summary of Contents for FMS-2000C































































Reviews:

No comments