Johnson & Johnson Surgical Vision Veritas, Operator'S Manual

Page: 96 / 270

Foot Pedal Setup Z370584 Rev. D
5-16
Surgeon Settings
Figure 5-14 — VERITAS Foot Pedal
VERITAS Foot Pedal Connections
You can attach the VERITAS Foot Pedal to the system either with a cable or with a wireless
Bluetooth
®
connection.
NOTE: The blue light on the pedal indicates that the wireless connection is active. The amber
light indicates that the battery needs to be charged.
To use the foot pedal with a cable, connect the foot pedal cable to the connector on the foot
pedal, and attach the other end of the cable to the foot pedal connector on the rear panel of
the system (see
Figure 3-2 and Figure 4-2 ). To use the foot pedal wirelessly, see “Wireless
Foot Pedal Setup” on page 7-4 .
VERITAS Foot Pedal Switch Assignment
The VERITAS Foot Pedal has four switches that you can assign specific functions to. Follow
the steps below to assign functions to the foot pedal switches.
NOTE: In addition to showing the type and status of the foot pedal, the foot pedal icon
(shown below) in the top of the screen also allows access to the Foot Pedal Settings
screen.
1. Handle 4. Treadle 7. Wireless Indicator
2. Left/Right Top Switches 5. Heel Rest 8. Battery Indicator
3. Left/Right Side Switches 6. Cable Connector