Johnson & Johnson Surgical Vision Veritas, Operator'S Manual

Page: 48 / 270

Foot Pedal Z370584 Rev. D
3-12
System Components
Foot Pedal Operation
The foot pedal has three active “pitch” ranges, which are referred to as positions 1, 2 and 3
(FP1, FP2, FP3). Position 0 is the off position, and position 3 is the fully pressed position. The
ranges are shown below. The Advanced Control Pedal has two Yaw switches.
Figure 3-11 — Advanced Control Pedal Pitch and Yaw Positions
NOTE: The foot pedal position determines the function that is delivered by the handpiece,
which depends on the mode selected on the touchscreen. When the foot pedal has
been attached, place your foot on the pedal and press to the desired position. See
“Edit Surgeon Settings” on page 5-4 for foot pedal settings and programming.
1. Pitch (Toe Down/Up, Configurable Ranges) 2. Yaw (Toe Right/Left, Configurable Ranges)