Johnson & Johnson Surgical Vision Veritas, Operator'S Manual

Page: 112 / 270

Foot Pedal Setup Z370584 Rev. D
5-32
Surgeon Settings
Figure 5-27 — Advanced Linear Pedal
Advanced Linear Pedal Connections
You can attach the Advanced Linear Pedal to the system either with a cable or with a
wireless Bluetooth connection.
NOTE: The blue light on the pedal indicates that the foot pedal is active. The amber light
indicates that the battery needs to be charged.
To use the foot pedal with a cable, connect the foot pedal cable to the connector on the foot
pedal, and attach the other end of the cable to the foot pedal connector on the rear panel of
the system (see
Figure 3-2 and Figure 4-2 ). To use the foot pedal wirelessly, see “Wireless
Foot Pedal Setup” on page 7-4 .
Advanced Linear Pedal Switch Assignment
The Advanced Linear Pedal has four switches that you can assign specific functions to.
Follow these steps to assign functions to the foot pedal switches.
NOTE: In addition to the procedure below, you can access the Advanced Linear Pedal
Summary screen by pressing the foot pedal symbol near the top of the screen.
1. Handle 4. Heel rest 7. Battery Indicator
2. Left and Right Top Switches 5. Treadle
3. Left and Right Side Switches 6. Wireless Indicator