Johnson & Johnson Surgical Vision Veritas, Operator'S Manual, Page: 104 / 270

Foot Pedal Setup Z370584 Rev. D
5-24
Surgeon Settings
NOTE: See “Charging Options for Wireless Foot Pedals” on page 10-4.
Table 5.5 – Advanced Control Pedal Default Settings
* Table 5.7 – Advanced Control Pedal Switch Assignments
Vitrectomy Foot Pedal Modes
Table 5.6 – Vitrectomy Advanced Control Pedal Modes
Advanced Control Pedal Connections
You can attach the Advanced Control Pedal to the system either with a cable or with a
wireless Bluetooth connection.
To use the foot pedal with a cable, connect the foot pedal cable to the connector on the foot
pedal, and attach the other end of the cable to the foot pedal connector on the rear panel of
the system (see
Figure 3-2 and Figure 4-2 ). To use the foot pedal wireless, see “Wireless Foot
Pedal Setup” on page 7-4 .
Advanced Control Pedal Switch Assignment
The Advanced Control Pedal has four switches that you can assign specific functions to.
Follow the steps below to assign functions to the foot pedal switches.
NOTE: In addition to the procedure below, you can access the Advanced Control Pedal
Summary screen by pressing the foot pedal icon (shown below) near the top of the
screen.
Parameter Available Settings Default Settings
Right/Left Yaw * Right Yaw=Reflux
Pitch Region 1-100% P1=5%
P2=30%
P3=60%
Yaw Position 5-100% Left=90%
Right=90%
Foot Pedal
Positions
Vitrectomy Foot Pedal Modes
ICA IAC Side VIT
1 Irrigation Irrigation N/A
2 Irrigation/Cut Irrigation/ Aspiration N/A
3 Aspiration Cut N/A