John Shearer Pasture Renovation Drill, Operator'S Manual

Page: 18 / 59

02.19M143J1
10
LUBRICATION
Item Operation Schedule
Wheel Hub Grease 200hrs
Axle Rockshafts Grease Daily / 10hrs
Clutch Grease Daily / 10hrs
Tynes Grease Daily / 10hrs
Distributor shafts Grease 50hrs
Trimming Screw Grease Annually
Varidrive Gearbox
Check for leaks (topup if
necessary-
SAE 50W/40
Motor
Oil)
Annually
Tyres
Check Pressure
Daily
Chains Check adjustment Daily
Chains
Annual Maintenance – thorough
check and re-grease
Annually
General Inspection
(Nut & Bolts)
Check for tightness
Daily
Hopper
Clean out at end of each day
(Particularly Hydroscopic
Fertilizer)
Daily
Grease Nipples Lubricate all prior to storage at
the end of each working period Seasonally
DO NOT LEAVE FERTILISER IN THE IMPLEMENT
OVERNIGHT. (PARTICULARY HYGROSCOPIC FERTILISER,
WHICH WILL TAKE UP MOISTURE AND HARDEN)
TYRE PRESSURES
TYRE PRESSURES ARE IMPORTANT
OVER INFLATION will impair flotation -
Increasing sowing depth variations as ground conditions vary.
UNDER INFLATION can result in tyre failures.
TYRE Pasture Renovation Drill
SIZE 2.0 2.4 2.8 3.3
Tyne Disc Tyne Disc Tyne Disc Tyne Disc
235/75 R15
TYRE
PRESSURE
kPa
250 275 280 300
psi 36 40 41 44
215/85 R16
TYRE
PRESSURE
kPa
450 480 525 560
psi 65 70 76 81
SPEED LIMIT 25km/h (10km/h SOWING)