background image

Please check the pack contents before attempting to assemble this product. A full checklist of compo-
nents is given in this leaflet. If any components are missing, please contact the John Lewis Helpline. 
 
This product is HEAVY, it should be assembled as near as possible to the point of use. 

TAKE CARE 

WHEN LIFTING

 to avoid personal injury and (or) damage to the product. 

 
This product takes approximately 

60 MINUTES

 to assemble with 

2 PEOPLE. 

 
The fittings pack contains 

SMALL ITEMS

 which should be 

KEPT AWAY FROM  YOUNG CHILDREN.

 

 
Read this leaflet in full before commencing assembly. 
 
If you are missing some fittings (cams, dowels and screws) please contact our spare parts  
helpline on 0330 005 9435. Opening hours are 9am - 5pm Monday to Friday.  
For all other queries, please call John Lewis Customer support on 0345 604 9049

Stock Code:  80324203 - 80324103 - 80324003

Mixit low wide unit

PRE-ASSEMBLY PREPARATION

 

Please ensure instructions are read in full before attempting to assemble this product. 

Necessary Tools

Small hammer

Drill

Eye protection

Spirit level

Screwdriver

MXT 70 rev. 03 - 26/02/20

Page 1

Thank you for purchasing this Mixit low wide unit. Please read the instructions carefully before use to 
ensure safe and satisfactory operation of this product.  

Summary of Contents for Mixit 80324203













Reviews: