background image

Important!

 if you call out an engineer to a

fault listed below, or to repair a fault caused
by incorrect use or installation, a charge will
be made even if the appliance is under
guarantee.

During machine operation it is possible that
the 

red

 pilot light of button 

5

 blinks to indicate

that the machine is not working.

Once the problem has been eliminated, press
the button 

5

 to restart the programme. If after

all checks, the problem persists, contact your
local Service Centre.

Problem

Possible cause/Solution

The washing machine does
not start:

The door has not been closed (the button 

5

 red light blinks).

• Close the door firmly.
The plug is not properly inserted in the power socket.
• Insert the plug into the power socket.
There is no power at the socket.
• Please check your domestic electrical installation.
The main fuse or the fuse in a plug has blown.
• Replace  the  fuse.
The programme selector dial is not correctly positioned and the
button 

5

 has not been pressed.

• Please turn the selector dial and press the button 

5

 again.

The machine does not fill:

The water tap is closed (the button 

5

 red light blinks).

• Open the water tap.
The inlet hose is squashed or kinked (the button 

5

 red light blinks).

• Check the inlet hose connection.
The filter in the inlet hose or the inlet valve filter is blocked. (the
button 

5

 red light blinks).

• Clean the water inlet filters. (See "Cleaning the water inlet filters"

for more details).

The door is not properly closed (the button 

5

 red light blinks).

• Close the door firmly.

The machine does not
empty and/or does not
spin:

The drain hose is squashed or kinked (the button 

5

 red light blinks).

• Check the drain hose connection.
The drain filter is clogged (the button 

5

 red light blinks).

• Clean the drain filter.
An option or a programme that ends with the water still in the tub
or a that eliminates all the spinning phases has been selected.
• Select the draining or spinning programme.
The laundry is not evenly distributed in the drum.
• Redistribute the laundry.

29

Summary of Contents for JLWM 1200





































Reviews: