John Lewis JLWM 1200, Instruction Manual

Page: 20 / 36

• Remove any objects from the pump
impeller by rotating it.
• Put the cap back on the emergency
emptying hose and place it back in its seat.
• Screw the pump cover fully in.
• Close the pump door.
Caution! When the appliance is in use
and depending on the programme
selected there can be hot water in the
pump.
Never remove the pump cover during
a wash cycle, always wait until the
appliance has finished the cycle, and is
empty. When replacing the cover,
ensure it is securely re-tightened so as
to stop leaks and young children being
able to remove it.
Cleaning the water inlet
filters
Warning! If the appliance doesn't fill
or it is taking longer to fill with water,
check if the water inlet filters are
blocked.
1. Turn off the water tap.
2. Unscrew the water inlet hose.
3. Clean the filter using a hard bristle brush.
4. Screw the hose back onto the tap.
5. Unscrew the hose from the machine.
Keep a rug nearby because some water
may flow.
6. Clean the filter in the valve with a stiff
brush or with the piece of cloth.
7. Screw the hose back to the machine and
make sure the connection is tight.
8. Turn on the water tap.
20