John Lewis JLBIIH805, User Manual

Page: 11 / 32

Daily use
Warning! Refer to Safety
chapters.
Activating and deactivating
Touch for 1 second to activate or deactivate
the hob.
The control panel comes on after you activate
the hob and goes off after you deactivate the
hob. When the hob is deactivated you can see
only sensor field.
Automatic Switch Off
The function deactivates the hob
automatically if:
• all cooking zones are deactivated,
• you do not set the heat setting after you
activate the hob,
• you spill something or put something on the
control panel for more than 10 seconds (a pan,
a cloth, etc.). An acoustic signal sounds and the
hob deactivates. Remove the object or clean
the control panel.
• the hob gets too hot (e.g. when a saucepan
boils dry). Let the cooking zone cool down
before you use the hob again.
• you use incorrect cookware. The symbol
comes on and the cooking zone deactivates
automatically after 2 minutes.
• you do not deactivate a cooking zone or change
the heat setting. After some time comes on
and the hob deactivates.
The relation between the heat setting
and the time after which the hob
deactivates:
Heat setting The hob deactivates
after
, 1 - 3
6 hours
4 - 7 5 hours
8 - 9 4 hours
10 - 14 1.5 hour
The heat setting
To set or change the heat setting:
Touch the control bar at the correct heat setting
or move your finger along the control bar until
you reach the correct heat setting.
Using the cooking zones
Put the cookware on the cross / square which
is on the surface that you cook. Cover the
cross / square fully. Induction cooking zones
adapt to the dimension of the bottom of the
cookware automatically. You can cook with the
large cookware on two cooking zones at the
same time.
Hob User Manual 11