Oxygen Regulator
Instructions & Warranty Information
JB0150-085, JB0150-086
Page 1: ...Oxygen Regulator Instructions Warranty Information JB0150 085 JB0150 086 ...
Page 2: ...the cylinder valve seat of debris Inspect the regulator for oil or grease If either is vis ible DO NOT use the regulator Be sure the sealing washer is in place on the inlet of the regulator Before attaching the regulator to the valve inspect the regulator and the seal to ensure that they re in good condition and be sure that the regulator has just one of the CGA 870 seals Slip the yoke over the cy...
Page 3: ...ckwise to the O position For safety be sure you are not directly in front of or behind the regulator when opening the cylinder valve Open the cylinder valve slowly while maintaining a grip on the valve wrench so that it can be closed quickly if gas escapes between the regulator and the valve SLOWLY turn the cylinder valve counterclockwise about one full turn If you can hear a hissing sound there i...
Page 4: ...his Limited Lifetime War ranty is an expression of our confidence in the materials and workmanship of our products and our assurance to the consumer of years of dependable service In the event of a defect covered by this warranty we will at our option repair or replace the device This warranty does not cover device failure due to owner misuse or negligence or normal wear and tear The war ranty doe...
