JOHARI DIGITAL Myolift QT, Instruction Manual, Page: 7 / 23

Myolift QT
Instruction Manual
6 | P a g e
DRAFT
3. HOW DOES IT WORK?
The Myolift QT devices use low-levels of safe, painless electrical impulses to the muscles in the face and neck.
The overly-tightened muscles relax and under-worked muscles regain their strength. In essence, microcurrent
facial toning re-educates the facial muscles and restores them back almost to their original shape. When this
happens the visible results are quite dramatic and the face is lifted, firmed, and toned back to a much more
youthful appearance. At the same time, the microcurrent improves circulation that stimulates the production of
collagen, improves tone and texture, and improves or eliminates fine lines.
Myolift QT facial toning is cumulative, which means that the more treatments the client has, the more
improvement they will see in their face and for a longer period of time.
Myolift QT is for facial lifting, tightening, and toning is a great alternative to a facelift since it is non-invasive, does
not require any recovery time, gives instant results, and does not have the same potential for harmful
complications as surgery does.
4. DEVICE INTRODUCTION
The Myolift QT is a Microcurrent, handheld, and mobile application-based device, and easy to operate. The
application is used in this device to support both the type of users (iPhone®/Android™). The User has to download
the application via Google Play™ store (Android) /App Store®
(iOS) and connect the device via Bluetooth of their
phone and make their profiles accordingly. Its outer case is made up of thermoplastic resin. The device comes
with an external Power Supply to recharge the lithium-ion battery of the device when not in use. The user will
charge the device via wall adaptor. The device is automatically closed if it is not connected via Bluetooth or not
operated for more than 10 seconds.
5. DESCRIPTION
The purpose of this device is for lifting and toning the face and neck muscles. It is a battery-powered device used
with conductive gel. The conductive gel is used to reduce the impedance between the lip and eye mask and the
skin of the user.
In Myolift QT there is one channel and two output ports. One output through the applicator ball and another
output through the lead wire via the USB port connected through the charging jacking point.
The Lead wire is connected to the device via C type connector. There are lip and eye mask that will connect
through the lead wire to give skin treatment to the user.
The round shape applicator balls made up of stainless steel in this device are designed to gently roll over the skin
to deliver low-level electrical impulses in the face and neck. This device delivers approximately maximum 310
microamperes and low 160 microampere current.
Note: Both the output ports will not work at the same time.