JOHARI DIGITAL Myolift QT, Instruction Manual, Page: 19 / 23

Myolift QT
Instruction Manual
18 | P a g e
DRAFT
14.TROUBLESHOOTING
If your device is not turning on, please ensure it is charged and/or unplugged from the charger.
If your device is still not working, please open the application in the device and tap on contact, another window
will be shown where you can send a e mail or call to the help line number.
15.MAINTENANCE
•
Before any maintenance, switch the device off and unplug it from the mains! Observe all safety principles. Never
dismantle the device and its accessories during cleaning!
•
Do not repair the device. All servicing must be carried out by an authorized Johari Digital service centre. Only
original parts can be used for repair; otherwise Johari Digital bears no responsibility for further operation of the
device.
•
Before contacting your authorized Johari Digital service centre, please get ready the device model number, serial
number and a detailed description of the issue you have encountered.
15.1 CLEANING
•
The device has to be always turned off by means of the mains switch when cleaning. The mains power switch
OFF.
•
The Device must be cleaned thoroughly prior to usage to remove visible soil. To clean the device, use a soft cloth
slightly moistened with water. Never use agents containing alcohol, chlorine, ammonia, acetone, benzene or
thinners.
•
Clean a device with a damp cloth from time to time. But be careful not to get the device wet.
•
Always turn the device off before disinfecting the lead wires. Disinfectants must not reach the air vents.
•
Clean the lead wires after each use with disinfectants approved for use in medical environments. DO not use
agents containing chlorine or those with a high alcohol content (more than 20%). Use a soft cloth slightly
moistened with disinfectant.
•
After disinfection, the accessories must be rinsed with a soft cloth slightly moistened with clean water so as to
prevent an undesired allergic reaction!
•
The device’s accessories are designed for non -invasive use; therefore, they do not need to be sterile and cannot
be sterilized
•
For routine cleaning of the lip and eye mask cables use soap and water. Thoroughly dry after cleaning.