19
4.9
Memory lock
The memory lock protects your settings.
1. Turn the key switch to the right to set the memory to ‘open’. The SET
piston lights.
2. Turn the key switch to the left to set the memory to ‘closed’. The SET
piston goes out.
4.10
Preprogrammed memory locations
Preprogrammed memory locations are available by operating pistons PP to
T. These six memory locations have factory settings (presets) appropriate
for the quiet pianissimo to the loud tutti.
Calling up a preprogrammed memory location
1. Press a preprogrammed memory location (PP-T) in. The active stops
light up.
Programming a preprogrammed memory location
1. Check that the key switch is to the right.
2. Select the desired stops.
3. Push the SET piston in. Hold the piston down.
4. Press the desired preprogrammed memory location (PP-T) in.
5. Release the preprogrammed memory location piston (PP-T).
6. Release the SET piston.
As long as the memory lock is closed, it is not possible to save new
settings in the memory.
The current setting of the preprogrammed memory location will be
lost.
The programming of a preprogrammed memory location is limited
to the text on the piston. For example, it is not advisable to program
a pianissimo registration under the tutti piston.
Summary of Contents for REMBRANDT 275
Page 1: ...1 USER MANUAL JOHANNUS REMBRANDT 275 375 395 AND 495...
Page 34: ...34...
