Johannus LiVE III AGO, User Manual

Page: 21 / 52

User Manual LiVE III AGO 22
Accessories
Reeds Off (RO):
Reeds Off is a function to switch off all reed stops simultaneously. As long as this
piston is lighted, no reed stops can be activated. When this function is switched
off, the reed stops that were on are activated again. Activate the Reeds Off with
the RO-piston.
Sequence - and + (SEQ-, SEQ+):
Sequence is a function for sequential selecting capture memory locations.
1. Select a capture memory location to start.
(for example level 2, location 2)
2. Use the SEQ- or SEQ+ pistons to select the previous or next capture memory
location 1-8.
3. When using SEQ+ on position 8, it switches to the next memory bank,
position 1.
All Swells to Swell (S/S):
All Swells to Swell transforms the expression pedal for Manual III, to a swell pedal
for the whole organ. Activate the All Swells to Swell with the S/S-piston.
Plenum (PL):
Plenum registration function, consisting of (if available) Principal stops 16', 8', 4', 2
2/3', 2’ and Mixture.
Tutti (T):
Tutti is a function to switch on the full organ registration with just one piston.
The function is reversible.
Crescendo (CR):
Crescendo is a function to activate and de-activate the Crescendo Pedal. If no
expression pedal is configured as crescendo pedal, the CR-piston cannot be
activated. See §4.10 Crescendo Pedal.
Hand Registration (HR) – for models with solid wooden drawknobs only
Only when the HR-piston is activated, you will be able to register manually.
Hand Regist (HR+) – for models with solid wooden drawknobs only
Only when the HR+ piston is activated, you can join your own registration to the
fixed- (PP to T and PL), or the capture memory combinations (1 – 8 and Mem. 1 -
50).
If no expression pedal is configured as a swell pedal for Manual III,
the S/S-piston cannot be activated.
If you are unable to hear an organ sound, after you have pulled a draw stop and
pressed a key, please check if the HR-piston is activated.