Johannus classic 250, User Manual

Page: 6 / 52

User Manual Classic 250/350 6
2 INSTALLATION
2.1 Installation organ
1. Position the organ on a stable, horizontal surface.
2. Lean the organ slightly backward.
3. Slide the pedal board (D) against the organ.
4. Set the organ upright.
5. Install the music desk (A) on top of the organ. See §2.2 Installation music
desk.
6. Place the organ bench (C) over the pedal board (D).
7. Make sure the voltage of the organ matches the voltage of the main. See the
serial plate (B).
8. Connect the organ to a grounded power socket.
Shown model: Classic 250