BEFORE USING THE FIRST TIME
Remove any packaging materials from the appliance. Clean the grill rack and its
accessories.
The barbecue assembly:
1. Fit the control seat with the front holes of the grill holes and screw. Before
connecting the grill to the mains, make sure all the screws are tightly fixed.
Note: the plastic pole must be upturned.
2. Insert the heating element into the grill rack (as the chart). Fill the grill pan with
water.
3. Place the heating element with the grill rack into the grill pan. Insert the control
box into the grill pan. Guarantee the plastic pole of the grill pan insert the hole
under the control box, and assemble right.
4. Place the grill on the table. Ensure that the grill is placed in a safe and stable
position. The power cord should be placed suitably in order that no one is likely
to trip over it.
5. Let the grill heat up for a moment without any food on the rack. This will reduce
the smell when first switching on a new grill (a slight smell and a little smoke
may be emitted-ensure sufficient ventilation).
GRILL
1. Fix the heating element; then ensure that the grill rack is placed correctly on
the element.
2. Insert the plug into the mains supply socket.
3. Place the food stuffs on the grill rack.
4. The water in the grill pan will evaporate during use. So you must to fill up water
from time to time. Be careful not to pour water on the heating element.
5. When grilling is finished, disconnect the grill from the mains supply socket.
-18-
