16. The hose should be regular checking for your safety, replace it if necessary.
17. The guard on the appliance is to prevent risk of fire or injury from burns and no part of it should
be permanently removed. It does not give full protection for young children or the inform.
WARNING
Perform a leak test on all connections every time you reconnect the cylinder, or if the
heater has not used for a significant period.
Don't twist the flexible tube or the hose.
Don't move the appliance when operating, shocks and bumps may activate the safety
device.
FAULT FINDLING CHART:
SYMPTOMS
FAULT
REMEDY
1.Pilot
will
not
light
automatically
No spark across electrode gap
(a)Ensure that piezo-electric
switch is functioning correctly.
(b)Check that electrical lead is
not damaged.
2.Pilot
will
not
light
automatically but points(a) to
(e) are satisfactory and the pilot
will light with a match
Incorrect position of spark in
relation to pilot gas flow.
Re-position spark plug so that
spark jumps across gas flow.
6.Smell of combustion
Missing piece of ceramic
fireclay.
Inspect perimeter of each
plaque and locate place where
some
fireclay
has
been
displaced.
Repair with PYRUMA and
leave to sot for approx.24
hours.
REPAIRS TO BE CONDUCTED BY AUTHORSED
25
