manualshive.com logo in svg

JMR electronics MARLIN FC-SATA300/SAS, User Manual, Page: 87 / 135

Share
Download
JMR electronics MARLIN FC-SATA300/SAS User Manual Download Page 87

Figure 92.  Increase Logical Volume Size Window

The Increase Logical Volume Size Window presents all the fields you need to
enhance your logical volume. The information below describes each field or area
of this window. 

Information box

Summary about increasing the size of a logical 
volume.

Device Information

Summary about the increased size for the 
selected array showing the logical volume's 
name, current size, RAID level, and the 
maximum size allowed. 

Increase Logical Volume Size Shows the maximum size allowed and 

the up/down arrows to make the change. 

OK button

Click here to commit and increase the size to 
this logical volume.

Cancel button

Click here to stop this operation. 

Additional Information about Increasing the Size of a Logical Volume

When you increase the size of a logical volume, you can only use a logical
volume within the associated array. 

MARLIN

TM

4-55

M

MA

AR

RLLIIN

N

T

TM

M

16-Bay 4G FC-SATA300/SAS RAID Array Management Users Guide Rev B

Summary of Contents for MARLIN FC-SATA300/SAS








































































































































Reviews:

No comments