JLG Toucan 12E, Operation And Safety Manual

Page: 89 / 136

SECTION 6 – GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
31210162 – JLG Lift – 6-13
- Fill the reservoir (1) with distilled water.
- Depress and hold the filling pump activation button (2) .
- Release the button when the flow indicator (3) slows down.
- Ensure the level is correct in each cell.
Figure 6-6. Adding Water to Batteries
1. Water Reservoir
2. Pump Activation Button
3. Flow Ind filter
Regularly:
- Clean and dry the battery top.
- Ensure the connections are clean and tight.
- Drain the water that can accumulate at the bottom of the
container (electrolyte overflow, leak in the filling circuit, bat-
tery cleaning…).
DRAINED WATER MAY HAVE BEEN IN CONTACT WITH ACID AND MAY
HAVE BECOME CORROSIVE. ENSURE THAT DRAINED WATER DOES
NOT COMES INTO CONTACT WITH SKIN OR CLOTHING. WEAR PRO-
TECTIVE CLOTHING AND EYEWEAR WHEN WORKING WITH BATTER-
IES. NEUTRALIZE ANY BATTERY ACID SPILLS WITH BAKING SODA
AND WATER.