JLG Toucan 12E, Operation And Safety Manual

Page: 67 / 136

SECTION 4 – MACHINE OPERATION
31210162 – JLG Lift – 4-13
IF THE SELF RESCUE PROCEDURE DOES NOT LOWER THE PLATFORM,
DISCONTINUE OPERATION IMMEDIATELY.
DO NOT USE MANUAL DESCENT CONTROLS.
PLATFORM OCCUPANTS MUST BE RESCUED AND THE MAST MECHA-
NISM SERVICED BY A QUALIFIED TECHNICIAN.
Gate Opening Warning Light (XL Basket Only)
When one of the side gates is open, the RED warning indicator
on the platform control console lights. All functions are disabled.
Close the gates to resume normal machine operation.
SIDE GATES MUST NOT BE USED AS A MEANS FOR ACCESS TO AND
EGRESS FROM THE PLATFORM.
Soft Touch Warning Light/Alarm (If equipped)
When the bumper under the work platform is against an obsta-
cle, the YELLOW light indicator at platform control station will
illuminate and an audible alarm will sound. Only the reverse
movement to the one that caused the contact with the obstacle
can be controlled in the Creep mode.
NOTE: This feature is only operational when the machine is con-
trolled from the platform control station.
4.9 MACHINE SAFETY SYSTEM OVERRIDE
(MSSO) (IF EQUIPPED)
The Machine Safety System Override (MSSO) is used to over-
ride function controls for Emergency Platform Retrieval only.
Refer to Section 5-6, Machine Safety System Override (MSSO)
for operating procedures.